September 20, 2021 12:34 pm

Taking a Look At Interior and Exterior Locksets

To ensure that you are secure you should install high quality locksets. There are two types of these units that you can buy: interior and exterior locksets.

Interior Locksets

They are also known as practice lockset passage locksets and their main aim is to provide you with privacy. The most common lockset is the set that has a push-button lock on one side. This unit is often used on bathroom and bedroom doors. The cool thing with interior locks is that they are easy to release from the outside as you only need to use a thin nail or a sturdy wire.

Interior locksets have different finishes such as bronze, chrome, and brass. They also come with different levers such as straight, curved, oval, and ornate. The most common units are cylindrical units. The cool thing with them is that they are easy to install. In fact all you need to do to install them is to pre-bore the door.

Exterior Locksets

They are also known as entry locksets and they are often heavier, more durable, and offer more security than interior doors.

You can easily lock and unlock the sets from both sides of the door using a key, button, or a throw latch depending on the type of set that you have. If you want to increase the security levels of your house you should ensure that the doors have deadbolts. You can have the deadbolts as part of the lockset or you can install them as a separate lock.

When installing the deadbolt, you should ensure that it extends 1 inch beyond the edge of the door. It should be made from case-hardened steel.

Experts recommend that you should use s double-cylinder deadbolt as it’s more secure. When you are in the house, you should leave the key in the interior lock in order to provide a quick exit in the event of fire or any other emergency.

Factors to Consider When Buying the Locksets

To buy the right lockset you need to consider a number of factors:

Door thickness: before you head to the stores you should measure the thickness of the door and ensure that the lockset will fit the door’s thickness.

Back set dimension: this is the measurement from the edge of the door to the center of the hole that is bored for the knob. As rule of thumb you should ensure that the dimensions on the door match those on the lock.

Comments (0)

Leave a Reply

Your email address will not be published. Required fields are marked *